Steel Right
 |
 316 UNF STAINLESS STEEL RIGHT HAND SWAGE STUD 1 2 5 16  US $65.67
|
 EYE END UNF 316 STAINLESS STEEL RIGHT HAND 5 8 US $45.69
|
 303 RIGHT UNF STAINLESS STEEL SWAGE AIRCRAFT STUD 3 8 US $45.05
|
 303 RIGHT UNF STAINLESS STEEL SWAGE AIRCRAFT STUD 5 16 US $42.23
|
 EYE END UNF 316 STAINLESS STEEL RIGHT HAND 1 2 US $36.96
|
 316 UNF STAINLESS STEEL RIGHT HAND SWAGE STUD 1 2 9 32 US $35.93
|
 316 UNF STAINLESS STEEL RIGHT HAND SWAGE STUD 3 8 1 4 US $28.14
|
 316 UNF STAINLESS STEEL RIGHT HAND SWAGE STUD 1 2 1 4 US $26.32
|
 YALE STEEL THREADED ROD M 20 X 250 LEFT RIGHT US $24.50
|
 303 RIGHT UNF STAINLESS STEEL SWAGE AIRCRAFT STUD 1 4 US $23.65
|
 EYE END UNF 316 STAINLESS STEEL RIGHT HAND 3 8 US $21.69
|
 303 RIGHT UNF STAINLESS STEEL SWAGE AIRCRAFT STUD 5 32 US $18.02
|
 EYE END UNF 316 STAINLESS STEEL RIGHT HAND 5 16 US $15.33
|
 316 UNF STAINLESS STEEL RIGHT HAND SWAGE STUD 3 8 3 16 US $15.25
|
 12Pcs M12 x 175 Stainless Steel Wing Nut Right Hand Thread US $15.00
|
 NIB STEEL CITY 17701 3 4 CONDUIT SUPPORT RIGHT ANGLE US $14.99
|
 EYE END UNF 316 STAINLESS STEEL RIGHT HAND 1 4 US $14.46
|
 12Pcs M12 x 175 Stainless Steel Acorn Hex Nut Right Hand Thread US $12.50
|
 316 UNF STAINLESS STEEL RIGHT HAND SWAGE STUD 1 4 3 32 US $10.97
|
 316 RIGHT UNF STAINLESS STEEL SWAGE STUD 1 4X 3 16 US $10.82
|
 12Pcs M8 x 125 Stainless Steel Wing Nut Right Hand Thread US $10.60
|
 12Pcs M6 x 1 Stainless Steel Wing Nut Right Hand Thread US $9.30
|
 303 RIGHT UNF STAINLESS STEEL SWAGE AIRCRAFT STUD 3 32 US $9.01
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNC 1 US $8.91
|
 316 RIGHT UNF STAINLESS STEEL SWAGE STUD 1 4X 5 32 US $8.14
|
 12Pcs M12 x 175 Stainless Steel Hex Nut Right Hand Thread US $7.80
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNF 3 4 US $7.55
|
 303 RIGHT UNF STAINLESS STEEL SWAGE AIRCRAFT STUD 1 16 US $7.21
|
 Hex Nut Full 1 8 UNC steel right hand 10 pcs US $6.99
|
 Right Angle Conduit 4 Steel City Beam Clamps RC4SC 4 Clamp US $6.95
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNC 5 8 US $3.05
|
 27420 New No Box Steel City 1 Right Angle Clamp US $2.63
|
 RIGHT HAND METRIC NUT 316 STAINLESS STEEL 16mm US $2.15
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNF 1 2 US $2.13
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNF 3 8 US $1.65
|
 RIGHT HAND METRIC NUT 316 STAINLESS STEEL 12mm US $1.43
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNC 1 2 US $1.37
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNF 5 16 US $1.35
|
 RIGHT HAND METRIC NUT 316 STAINLESS STEEL 10mm US $1.00
|
 RIGHT HAND METRIC NUT 316 STAINLESS STEEL 6mm US $1.00
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNC 1 4 US $1.00
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNC 3 16 US $1.00
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNC 3 8 US $1.00
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNC 5 16 US $1.00
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNF 1 4 US $1.00
|
 RIGHT HAND TURNBUCKLE NUT 316 STAINLESS STEEL UNF 3 16 US $1.00
|
Different Security Choices For A Firearm Safe
If you are a gun owner then you really need to consider the benefits of having a gun safe. Accessabillity needs to be a simple and fast process for you but ny impossible for anyone that is not supposed to have access.
Typically safes are made from hardened, heavy guage steel that is aound 1/2 thick. The safe may have two sheets of hard steel, with ball bearings sandwiched between the two layers. The ball bearings make drilling through the safe incredibly hard to say the least.
For any safe, the lock and the door are by far the weakest points. When you lock the safe it should activate at least 4 locking bolts on all sides that are either made out of titanium or at the minumum hardened steel. Hinges are on the inside of the safe, so they do not pose any weakness.
You can find safes with either combination, key , or fingerprint activated locks. The best safes have combinations of different types of lock and time delays before a lock will open.
A keyed lock is probably your least secure option as anyone who knows what they are doing can open even the most difficult of them. The combination on a rotary type combination ock can be figured out pretty easliy by an expert as well. A keypad combination is the best if you have a combination lock. There are not any types of moving parts for a burglar to listen to if they want to break into a safe wit ha digital locking mecanism.
Remember to always be sure that the keypad remains clean. Dirty or clean keys give clues to anyone trying to get into your safe. Make sure the combination you choose bears no relationship to phone numbers, birth dates or any other data that can be guessed.
The biometric gun safe is probably the best bet for unbreakable security. With this option, you know without a doubt that no one can open your safe without your knowledge as long as your fingers are still attached.
You will get the best protection for your guns or valuables by having a fingerprint lock that allows more than one person to access it, or if that is not possible then one with a keypad and a fingerprint lock both.
You will find that a lot of the safes have some built in fire protection that will keep your contents safe in the event of a fire. This is done with the use of layers of insulation and an expanding seal on the door which prevents oxygen from entering and damaging the contents.
Read more on gun safes for sale
Cutting Plasticard__________?
Great stuff for models but how to cut a straight line? The only method I know is to print out plans on paper and glue them to the card and use a steel rule as a guide, but what if I just want to cut a few random pieces?
I need a STEEL right angle but nowhere seems to sell them except for some online stores selling super-expensive precision tools.
It's starting to annoy me; why is it so damned hard to find something made of metal that has a right angle? Sounds silly doesn't it? But take a look around your own home and see if you can find a single flat metal item that has a right-angle on it!
Couldn't you use a bracket from a DIY store - you know one of those flat connecting plate things in an "L" shape? They cost about a quid.
I was also wondering if it would be possible to use a computer printer to print the plans straight onto the plasticard - I might give that a try with an old printer.
The /Filmcast: After Dark – Ep. 166 – The Insanity of Piranha 3D (GUEST: Paul Scheer) (slashfilm)
The /Filmcast: After Dark is a recording of what happens right after The
/Filmcast is over, when the kids have gone to bed and the guys feel free to
speak whatever is on their minds. In other words, it’s the leftover and
disorganized ramblings, mindfarts, and brain diarrhea from The /Filmcast, all
in one convenient audio file. In this episode, David Chen [1], Devindra
Hardawar, and Adam Quigley chat with Paul Scheer [2] about the craziness
behind the set of Piranha 3D, as well as Paul's exciting other projects. Check
out Paul's amazing interview with Punisher: War Zone director Lexi Alexander.
[3] You can always e-mail us at slashfilmcast(AT)gmail(DOT)com, or call and
leave a voicemail at 781-583-1993. We'll be reviewing The Immortals next week.
Tune in to Slashfilm's live page [4] on Sunday (11/20) at 10 PM EST / 7 PM PST
to hear us discuss Martha Marcy May Marlene. Download [5] or Play Now in your
Browser: [audio:http://traffic.libsyn.com/slashfilmcast/Afterdarkep166.mp3]
Subscribe to the /Filmcast: [6] [7] [1] http://www.davechen.net [2]
http://www.paulscheer.com [3] http://www.earwolf.com/episode/punisher-war-
zone/ [4] http://www.slashfilm.com/live [5]
http://traffic.libsyn.com/slashfilmcast/Afterdarkep166.mp3 [6]
http://feeds.feedburner.com/filmcast [7]
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=281400220
Lap Steel Right and Left Hand Technique
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.