Steel Zip Ties
 |
 25 WIDE SS STAINLESS STEEL CABLE ZIP TIES MONSTERS 12  US $18.79
|
 25 STAINLESS STEEL ZIP TIES STRAPS EXHAUST HEADER WRAP US $17.65
|
 25 STAINLESS STEEL ZIP TIES STRAPS HOBBY EXHAUST US $17.00
|
 10 PACK 205 STAINLESS STEEL ZIP TIES CABLE TIES LONG US $16.99
|
 16 15 Stainless Steel Locking Ties Zip Tie Header Wrap US $16.00
|
 10 WIDE 5 16X8 STAINLESS STEEL ZIP TIES STRAPS CABLE US $12.99
|
 16x 8 Stainless Steel Locking Ties Zip Tie Header Wrap US $12.00
|
 25 STAINLESS STEEL ZIP TIES STRAPS HOBBY EXHAUST fast ship US $9.99
|
 10 STAINLESS STEEL ZIP CABLE TIES STRAPS BALL LOCK TYPE US $9.99
|
 10 STAINLESS STEEL ZIP TIES STRAPS HOBBY EXHAUST 12 US $9.50
|
 8 15 Stainless Steel Locking Ties Zip Ties Header Wrap US $9.00
|
 8x 8 Stainless Steel Locking Ties Zip Ties Header Wrap US $7.00
|
 4 8 Stainless Steel Locking Ties Zip Ties Header Wrap US $4.00
|
Seven Easy Ways To Produce A Pen Holder From Old Floppy Discs
You’re able to reuse your old floppy discs by developing pen cases out of them. To achieve this, you have to gather the supplies and also equipment required, drill slots into 4 floppy discs, drill two holes in the one remaining floppy disc, position the first four disks in a row, connect the disks using the zip ties, shape a box by way of folding the edges, and fix the bottom.
Older floppy disks could be a hassle to dispose of. The good news is, there are a lot of recycling initiatives that make use of your classic floppy discs and one of them will be to generate binder pages that hold floppy disks for your own pencils. This kind of job is relatively easy to build which is ideal for those who really like personal computers and also recycling. The pen case can also help you to manage your writing instruments. Study these simple steps to create your own pencil holder using outdated floppy discs:
Collect the materials and also tools needed
Ensure that you obtain the following tools and also materials needed for the project: 5 floppy disks that are three ½ by five inches in size, sixteen zip ties, a part of classic scrap wood, a drill that has a size 5/32 drill bit, and also a couple of scissors.
Punch holes into four floppy disks
Select four floppy disks and punch 4 holes into every disc. Be sure to place the old piece of wood on your own worktop or perhaps table to make sure you will never damage it during the drilling procedure. The top two holes must be on the top portion of the disks on each side of the metal sliders approximately 1 inch underneath the dent. The lower part slots should be drilled on the edges approximately a half-inch from the base of the disc.
Punch a couple of slots on the remaining floppy disk
Regarding the fifth and last floppy disk, drill openings on each of the corner of the disc. This specific disc could function as the bottom of the pen case. Don’t do anything to this floppy disk until it’s the moment to affix the bottom.
Arrange the first 4 discs in a row
Take the four disks you formerly drilled and position them side by side to shape a row. The metal sliders need to be installed towards the top for all four discs.
Attach the discs using the zip ties
You may now have to slip the zip ties to the openings and attach the 4 disks together. This part can lead to a straight line made up of the four discs. Remember to pull the zip ties securely so they will be organised together safely.
Form a box simply by folding the ends
You can now shape a box by simply folding the sides around. The last 2 edges must be connected together using zip ties. Pull tightly to keep them in place.
Affix the bottom
After you have shaped a box, turn it upside down. The side with the metal sliders will now be on the table. The fifth floppy disk is now able to linked. Install it on the bottom of the box and then affix it to the edges using the zip ties tucked via the holes. Use the scissors to slice off the edges of the zip ties.
In addition to finding uses for old items that you would otherwise discard, recycling projects can be your own way of preserving the environment.
Written by Daina W. Morrison.
Spyderco Zip-tie Mod
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.