Toggle Bolt
 |
 1000 Pieces 1 4 20 Toggle Bolt Spring Wings 10 Boxes of 100 Wall Anchors New  US $187.00
|
 Hilti Toggle Bolts US $50.00
|
 CASE LOT Toggle Bolts 100 RETAIL PKS 300 pcs Total US $49.95
|
 CASE LOT Toggle Bolts 100 Retail Pkgs 300 pcs Total US $49.95
|
 New 100 Toggle Bolts 1 4 20 x 6 screws Zinc Anchors US $49.60
|
 3 16 X 5 MUSHROOM HEAD TOGGLE BOLT W WING 100 BOX US $35.25
|
 3 8 X 6 MUSHROOM HEAD TOGGLE BOLT W WING 25 BOX US $35.25
|
 3 16 X 4 MUSHROOM HEAD TOGGLE BOLT W WING 100 BOX US $34.95
|
 5 16 X 5 MUSHROOM HEAD TOGGLE BOLT W WING 25 BOX US $34.75
|
 5 16 X 6 MUSHROOM HEAD TOGGLE BOLT W WING 25 BOX US $34.75
|
 3 8 X 4 MUSHROOM HEAD TOGGLE BOLT W WING 25 BOX US $34.75
|
 1 4 X 3 MUSHROOM HEAD TOGGLE BOLT W WING 50 BOX US $33.75
|
 3 16 X 3 MUSHROOM HEAD TOGGLE BOLT W WING 100 BOX US $32.75
|
 1 4 X 6 MUSHROOM HEAD TOGGLE BOLT W WING 50 BOX US $32.75
|
 1 4 X 5 MUSHROOM HEAD TOGGLE BOLT W WING 50 BOX US $32.75
|
 5 16 X 4 MUSHROOM HEAD TOGGLE BOLT W WING 25 BOX US $32.75
|
 3 8 X 3 MUSHROOM HEAD TOGGLE BOLT W WING 25 BOX US $32.25
|
 3 16 X 2 MUSHROOM HEAD TOGGLE BOLT W WING 100 BOX US $31.95
|
 1 4 X 4 MUSHROOM HEAD TOGGLE BOLT W WING 50 BOX US $29.95
|
 5 16 X 3 MUSHROOM HEAD TOGGLE BOLT W WING 25 BOX US $29.75
|
 1 8 X 4 MUSHROOM HEAD TOGGLE BOLT W WING 100 BOX US $29.25
|
 1 8 X 2 MUSHROOM HEAD TOGGLE BOLT W WING 100 BOX US $26.75
|
 CASE LOT Mushroom Head Toggle Bolts 25 pkgs 150 pcs US $24.95
|
 50 TOGGLE BOLTS 1 4 x 2 3 8 NEW US $24.00
|
 TOGGLE ANCHOR BOLT 3 8 X 6 US $22.50
|
 Lot Of 50 Wej it TBM1450 Steel 1 4 Mushroom Head Toggle Bolt Anchors NEW US $20.00
|
 1 4 x 2 Toggle Bolts 5 boxes 50 Box US $20.00
|
 Box of 50 1 4 X 4 CULLY TOGGLE BOLTS and WINGS p n 58565 US $19.99
|
 25 3 8 x 4 Rawl 4441 round head toggle bolts NIB US $19.99
|
 1 4 x 3 Power Fasteners Toggle Bolts US $19.99
|
 100 1 8X 3 TOGGLE BOLTS MUSHROOM HEAD SPRING WINGED PHILIP HEAD 58149 US $19.00
|
 50 1 4 X 4 TOGGLE BOLTS BY CULLY MUSHROOM HEAD SQUARE SLOT US $18.98
|
 1 2 X 4 Toggle Bolts Lof of 25 US $18.00
|
 Box Lot 50 Spring Wing Toggle Bolts 3 16x4 US $17.99
|
 Box Lot 50 Spring Wing Toggle Bolts 3 16x3 US $17.99
|
 Toggler 20 Pack Toggle Bolts Hollow Wall Anchors 3 16 Screws US $17.00
|
 BOX OF 50 RAWL TOGGLE BOLTS ROUND HEAD 1 4 X 5 US $15.00
|
 Toggler 30 Pack Toggle Bolts Hollow Wall Anchors 3 16 US $14.95
|
 1 4 x 4 Combo Round Head Toggle Bolt 25 pk TBMH144A 24G US $14.50
|
 Stanley 22550 Toggle Bolts 1 4” X 5” Round Head 50pcs US $12.00
|
 NIB CULLY 58549 PHIL SLOT TOGGLE BOLTS 1 4 X 3 50CT US $12.00
|
 50 piece 1 8x2 Toggle Bolts by Hillman no 370039 US $11.99
|
 1 8x3 Toggle Bolt by Hillman Fastener 370042 US $11.99
|
 3 16x3 Wing Toggle Bolt by Hillman Fastener 370054 US $11.99
|
 New Mushroom Head Toggle Bolts 1 4 x 4 Qty 25 US $11.95
|
 TOGGLER Ratcheting Toggle Bolt Anchor 43321 Pack of 10 Grainger 5LU98 US $11.00
|
 3 16x2 Spr Wing Toggle Bolt by Hillman Fastener 370051 US $10.49
|
 3 8 X 16 X 4 Toggle Bolts US $10.00
|
 7 USE STEEL RIGHT HAND TOGGLE BOLTS 1 2 13 X 4 NEW US $10.00
|
 Qty of 50 Fastening System Toggle Bolt TBM3640 US $9.99
|
 12pc Buildex EZ Toggle Bolts Screws US $9.99
|
 Toggle Bolt Assortment by Hillman Fastener 130288 US $9.99
|
 1 8x3 Wing Toggle Bolt by Hillman Fastener 370110 US $9.99
|
 Pro Grip anchor point with toggle bolt US $9.99
|
 Toggle Bolt 5 16 18 x 5 20 pieces US $9.99
|
 Toggle Bolts 3 8 16 x 3 20 pieces US $9.99
|
 NEW HEAVY DUTY Cadmium Plated 1 4” TOGGLE BOLTS B65 tumble wing 50 box US $9.95
|
 NEW HEAVY DUTY 1 4” 20 4 TOGGLE BOLTS 50 each Plated 5306002093796 US $9.95
|
 25 Toggle Bolts 1 8 x 2 US $8.95
|
 4 1 4 X 4 TOGGLE BOLTS MUSHROOM HEAD SQUARE PHILLIPS SLOT FREE SHIP USA US $8.95
|
 50 Toggle Bolts 3 16x3 Round Head Screws wing fastener anchor US $11.00
|
 box of 50 1 4 x 3 Toggle Bolts US $8.50
|
 NIB DOTTIE TBC43 PHIL SLOT 1 4X3 TOGGLE BOLTS MUSHROOM US $8.00
|
 1 8 x 4 Mushroom HD toggle Bolt Allied bolt US $7.50
|
 HILLMAN 370066 TOGGLE BOLTS 1 4 X 3 LOT OF 26 NIB US $7.50
|
 Dottie TB363 Slotted Toggle Bolts US $7.19
|
 COBRA TOGGLE BOLTS 30 X 1 8X3 US $6.36
|
 TOGGLE BOLTS 1 4 x 3 1 8 x 3 LOT OF 10 VARIETY OF SIZES NIB US $4.99
|
 20 Red Head Toggle Bolts Round Head 3 16 x 2 US $4.00
|
 15 Red Head Toggle Bolts Round Head 3 16 x 4 US $4.00
|
 1 8x2 XL Toggle Bolt by Hillman Fastener 41420 US $3.59
|
 3 16x4 Toggle Bolt Anchor by Hillman Fastener 5028 US $1.39
|
 1 8x3 Toggle Bolt Anchor by Hillman Fastener 5024 US $1.39
|
 POWERS 04241 TOGGLE BOLTS ROUND HEAD 147502 US $1.00
|
Cleaning Water Tanks
You can have a household asset in the form of a water heating tank and all you have to do is give it the proper care and attention. You need not worry for cleanups are minimal now that automatic water tanks are within our reach. Avoid galvanized metal in your water tank as this material can lead to internal rusting. A tank that is fabricated out of galvanized metal will have rough sides which often collect the sediments that are found in the water. You can rely on the copper tank for a longer time but it is pricey though. The great thing about copper tanks is that they are rust and scum free. Thank you for reading about wastewater treatment systems and water tanks.
Water tanks that have glass linings are also very popular. For this tank, the interior surface is lined with porcelain. Remember that you have alternatives when it comes to these things.
Every tank should have a regular schedule when it comes to draining. If the tank is not yet clean, you need to keep draining the water out. Scum tends to stick to the bottom of the tank if hot water is used and this is why it should be avoided if any draining is to take place. In this case, keep the tank cool. Heating the water up to is acceptable here. If you need hot water, turn the thermostat up but if you do not, turn it down.
What is important in this case is that you have access to the shut off controls. Hot water should have a valve and the cold water should also have a valve. In this case, if your tank is operated with gas, have a shut off control for it. Further your knowledge on water tanks at waste water systems.
Check the off button. In this case, a safety valve is also necessary. Go for an automatically running safety valve. Avoid any mishaps and orient the valve-linked pipe so that it faces downward.
If you need minor repairs done and do not have access to a toggle bolt and a heavy washer then you can use plugs instead. Problems start with leaks and develop from there. Here, you might want to address a serious seam issue. Temporary repairs can only do some much at this point.
Safe to mount clothes dryer using toggle bolt?
I have a Hoover 5010d clothes dryer that I would like to mount on the wall but unsure of how to do this.
I have the wall mount kit, but the problem is how to attach to the wall without studs?
The wall mount kits is approx 520mm at the longest for screw holes. However my wall studs are 600mm apart.
I know that I can screw a piece of timber (600mm long) into the studs and then attach the dryer, but this will leave the additional length of timber on either side of the dryer which I don't want.
Would it be safe to screw one end of the bracket into the stud, and use a toggle bolt to screw the other end into the gyprock (drywall)?
The dryer is approx 25kg heavy.
The gyprock is 10mm thick
Are toggle bolts strong enough to support this kind of weight?
The toggle bolts are strong enough but the drywall is not. The dryer vibrates too much. The vibration will break the wall where the toggle bolts connect. If you add timbers between the studs, that would beef up the wall enough if you make sure you have a great connection between the added lumber and the studs. Use framing connection brackets and screws - don't just nail the 2X4 in place. You don't have to have timber sticking out on the sides of the dryer if you cut off any excess.
Mayan
DIY wrist-mounted crossbow gets you one step closer to being a super hero (or villain) (Engadget)
When it comes to all things DIY we tend to be drawn in by odd, internet-
connected esoterica and Arduino-powered beer distributors. But, we won't lie,
nothing gets us going like a home-crafted instrument of destruction. And, in
that vein, may we present you with the wrist-mounted crossbow from homebrew
weapon artisan Patrick Priebe. Usually Priebe sticks with lasers but, for this
project, he went old school -- as in medieval. The bolt firing wristband isn't
without its modern accouterments, though -- a pair of AA batteries and toggle
switch are hidden in the palm which power a laser sight for better targeting.
We won't waste any more of your time, everything you want to see is contained
in the video after the break.
Continue reading _DIY wrist-mounted crossbow gets you one step closer to being
a super hero (or villain)_
DIY wrist-mounted crossbow gets you one step closer to being a super hero (or
villain) originally appeared on Engadget on Tue, 01 Nov 2011 17:52:00 EDT.
Please see our terms for use of feeds.
######
Permalink Technabob | Patrick Priebe (YouTube) | Email this | Comments
How to Hang Heavy Objects Using Toggle Bolts
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.